Product Description
DTM04 -22'' Probes -Adjustable
Without Vent (this means you already have a vent placed on your tank and do not need a port in this unit for one)
OR
With Vent (this means you do not have a vent placed on your tank and need a port in this unit for one)
Note: Make sure you have the necessary fittings in your holding tank for DTM installation. It requires a 3" FTP (female pipe thread) fitting. If you do not have an existing clean out port in your holding tank, you may need to purchase the Flange Kit
Dometic Tank Monitor Systems allow boat owners to keep accurate, continuous track of holding tank capacities through improved monitoring technology. DTM systems combine Dometic proven micro-float sensors with a compact, newly styled indicator panel. Special features include:
Multi-level Monitoring each set of four indicator lights shows Empty, Low, Mid and Full levels.
International Symbology panel graphics depict type of tank and fluid level of each. Eliminates confusion.
Fits Diverse Tank Sizes probe lengths fit tanks up to 23 inches (58.4 cm) or 46 inches (116.8 cm) in depth
Continuous Level Indication one light is always lit to indicate system power.
Flexible Tank Probes helps prevent tank float switches from fouling , eliminating false readings.
Multipurpose Probe Cap provides 5/8-in. (16 mm) vent hose connection; serves as clean-out fitting.
Optional Automatic Full Tank Shut-down prevents overfilling waste holding tank. Shut-down relay plugs directly into DTM4 panel; can be wired externally to DTM8 and DTM12 panels.
12- or 24-volt Operation Indicator panels can be wired to work with either system voltage.
Installs on any rigid holding tank material use optional SeaLand Universal Flange Kit for tanks other than Dometic brand.
Warning: This item may contain ingredients that are listed under P65warnings.ca.gov
