Key for viewing the 3D tank diagram

Top
Bottom
Front
Back
Left
Right

Diagram preview notes:

  • All measurements entered are to the center of the fitting. If you choose 1”, the fitting will be placed as close to the edge as possible.

  • Colored dots on the tank are only for visual reference and may not appear as the measurement you select.

  • Fittings will be installed by the inch reference you provide.

Dometic
SKU/Product #: T-Pump-Repair-Kit

T-Pump Repair Kit

$175.90
$236.98
Shipping: Calculated at Checkout

Product Description

This maintenance kit includes everything needed to rebuild your pump (minus motor) to make it run like new. Confirm your pump body is white in color.  This is for a Sealand / Dometic discharge pump called the "T Pump" short for "Transfer Pump"

This kit rebuilds:

T-Pump -Pump part number: 317301200 (12v), 317302400 (24v)

This T pump kit for discharge applications includes:



  • (1) 385310076- 1.5" Duck Bills -(ONLY ONE SET- 2 EA)

 

NOTE: Please be aware of Knock-Off Bellows being sold by companies that are not affiliated with Dometic. They will not fit Dometic pumps. They are too tall, too thin and are not sealed to create or hold vacuum. Here is the comparison of the Dometic Bellows vs the Knock-Off.



Bellows Installation Tips: These instructions are from a vacuum pump and they are black in color.  Yours should be white in color.


STEP 1: Make sure the o-ring is INSIDE the top lip of the bellows!!


STEP 2: Snap the bellows into place by squeezing the bellows and the pump top together.

STEP 3: The o-ring should not be visible from the side view. It will be sealing the bellows opening to the pump top inside the bellows lip itself.


STEP 4: Clamp the bellows onto the lid

 

 

Warning: This item may contain ingredients that are listed under P65warnings.ca.gov

You May Also Like